EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 94)

EVS Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
Version 9.00
85
11.2.8 H
OW TO
C
ANCEL A
N
ETWORK
C
OPY
11.2.8.1 O
N THE
R
EMOTE
When the clip is copying, its light flashes green. Pressing CLEAR + the
corresponding F_ key allows cancelling the network copy. A confirmation
screen comes up to cancel the network copy: “Cancel network copy ?
MENU: Do not cancel copy - ENTER: Cancel copy”
11.2.8.2 O
N THE
VGA
Select the clip and press the CTRL+DELETE keys. A confirmation screen
comes up. “Cancel network copy? ESC: Do not cancel copy - ENTER:
Cancel copy”
If the Copy Clip option copies several cams of the same clip and some of
them have already been copied before the Cancel function, the cancel does
not do a delete of the copied files, it just cancels the cam(s) still copying or
to be copied of that clip. It does not cancel the copying of other clips.
The Cancel function remains possible even if the page where the clip is
being copied is protected.
11.2.9 H
OW TO
S
HORTEN A
C
LIP
1. Recall the desired clip by pressing the corresponding F_ key.
2. Move the jog dial to browse the clip and reach to the desired Short IN
point.
3. Press the IN key to mark a new Short IN point. The new Short IN
point is instantly saved.
4. Move the jog dial to reach the desired Short OUT point.
5. Press the OUT key to mark a new Short OUT point. The new Short
OUT point is instantly saved.
Move the lever or press the PLAY key to play the clip. The replay will stop
at the new Short OUT point (or after the Short OUT point if the Post-Roll
mode is enabled).
GOTO IN and GOTO OUT
You can use Goto IN and Goto OUT functions to jump immediately onto
Short IN or Short OUT points respectively.