15 browse button: browse/sort-tc, 16 reset archive status, 8 timeline settings – EVS MulticamLSM Version 9.00 - March 2008 User's Manual User Manual
Page 33: 15 b, 16 r, 1 tl

EVS
Multicam - User Manual
Version 9.00
EVS Broadcast Equipment SA – March 2008
24
When the function is enabled and a default XFile has been assigned, the
grab function is coupled with the Mark key on the Remote. Each time the
Mark key is used, a cue point is marked and a command is sent to the XFile
to save that image. The grab can also be activated on the keyboard with the
combination CTRL + G.
4.7.15
B
ROWSE
B
UTTON
:
B
ROWSE
/S
ORT
-TC
Possible values: Browse (default), Sort-TC
This allows the user to convert the function of the BROWSE button:
• In the default BROWSE mode, it will activate the Play-list Browse
directly.
• If the value is changed to SORT-TC, the system will perform a Sort TC
directly. The system will not prompt the user with a select menu, and it
will use the current TC on the channel to search with the last selected
criteria.
If the user wants to perform a search with different criteria (Search Net or
Local, StartDate, EndDate, CAM/CLIP, etc… ), the user should use the
normal Sort-TC selection in the upper menu.
4.7.16
R
ESET
A
RCHIVE
S
TATUS
:
Pressing F6 will reset the archive status of all clips present on the system.
A confirmation is required. Refer to the description of the Archive function
for details.
4.8
TIMELINE SETTINGS
Timeline p.3.4
[F1]TL Receive Pg : 1 2 3 4 5 6 7 8 9
0
[F2]Mono per Track : 1
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
4.8.1
TL
R
ECEIVE
P
AGE
Default: 0
This parameter allows specifying where clips created as part of the timeline
editing process will be stored.