Zo autom, Zero offset – Siemens Sinumerik 810T User Manual
Page 98
2 Operation
09.91
2.5 Glossary of softkey functions
ZO AUTOM
(AUTOMATIC ZERO OFFSET)
By traversing to the desired reference plane, the zero offset can be measured and stored.
ZERO OFFSET
The settable zero offsets are input as setting data. Programmable and external zero offsets are
displayed on the CRT (see Section 3.1.5).
2-74
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)