Siemens Sinumerik 810T User Manual
Page 61
11.90
2 Operation
2.3.3 Selection of operating modes
2.3.3.2 Selection of operating modes with external machine
control panel
INC FEED...
Incremental Feed
(5th to 9th position)
MANUAL DATA INPUT/
AUTOMATIC
ACTUAL VALUE
SETTING
PRESET
Preset Setpoint
(1st position)
TRAVERSE TO
REFERENCE POINT
REPOSITIONING
Reapproach contour
AUTOMATIC
OPERATION
Execute stored programs
INCREMENTAL
FEED
FEED/
JOG
1, 10, 100,
1 000, 10 000
Rotate the mode selector switch to the
desired position.
Symbol on the
selector switch
Function
Designation of the
operating mode
MDI-AUTOMATIC
Manual Data Input-
Automatic
(2nd and 3rd position)
JOG
Jogging(4th position)
REPOS
Reposition
(10th position)
AUTOMATIC
(11th and 12th position)
REFPOINT
Reference Point
(13th position)
1
10
10 000
1 000
100
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
2-41
SINUMERIK 810T, GA3 (BN)