Siemens Sinumerik 810T - Manual (Page 107)

09.91 3 Operating Sequences
3.1.4 Tool offset
3.1.4.2 Deleting/modifying an individual offset value
You select the desired tool offset number under which you intend
to delete/modify an offset value with the ”Page up/down” keys.
With these keys you position the cursor at the input field to be
deleted/modified.
Using the numerical keys you enter the value ”zero”
(delete) ...
or
... Using the numerical keys you enter a new value
(modification).
With this key you transfer the deletion or modification into the
offset memory.
0
S
• • • • • •
or
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-9
SINUMERIK 810T, GA3 (BN)