1 influencing the program – Siemens Sinumerik 810T User Manual

Page 197

3 Operating Sequences

09.91

3.2.3 Influencing ”AUTOMATIC” operation

3.2.3.1

Influencing the program

With the operation of the softkeys described here, the active program is influenced.

PROGRAM
CONTROL

Operate the ”PROGRAM CONTROL” softkey in the
”AUTOMATIC” or ”MDI AUTOMATIC”operating mode.

Sequence of operation

This CRT display with a menu of 5
functions appears.

((Bild 810T/43 einmontieren))

By operating any of the 5 softkeys, you can now change over the preset ”NO” to ”YES”. A
function marked with ”YES” is active.

SKIP BLOCK
YES-NO

You select, for example, the ”SKIP BLOCK” softkey function .

Display:

Skip block

YES

Blocks in the program which are marked with an oblique before the block number
(”/ N ...”) are skipped.

3-94

SINUMERIK 810T, GA3 (BN)