Siemens Sinumerik 810T - Manual (Page 111)

3 Operating Sequences 09.91
3.1.4 Tool offset
STORE
X AXIS
The tool offset for the selected axis is automatically calculated and stored in the tool offset
memory.
Position the cursor on the input field for the tool offset
number D with the cursor keys.
Using the numerical keys, now enter the desired tool
offset number D... of the tool to be measured (”5” in
this example), and terminate your entry with the input
key.
Enter the coordinate ascertained with the gauging
device for the ”X-axis reference plane”, and store it
using the ”STORE X AXIS” softkey.
Now store the “Z-axis reference plane” in the same
way.
5
J
• • •
... ...
3-12 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)