Siemens Sinumerik 810T - Manual (Page 131)

3 Operating Sequences 09.91
3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICAT.”
This input screen form appears with
the input field marked in
inverse video.
(( 810T))
(( Bild 24von Druckerei
einmontieren
Use the cursor keys to position the inverse marking
on the required input field and change the minimum
and maximum working area limitation for the defined
axes (for the fictitious axes of the TRANSMIT
function, too).
Enter the value for the selected input field with the
numerical keys.
Subsequently, you can transfer the value into the
input field with the input key.
... ...
• • •
DRF
ASSIGNM
Operate the ”DRF ASSIGNM” softkey.
This input screen form appears with
the input field marked in
inverse video.
((Bild 810T/25 einmontieren))
You can assign each of up to seven axes (for the TRANSMIT function) to a handwheel.
3-30 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)