Siemens Sinumerik 810T - Manual (Page 173)

3 Operating Sequences 01.93
3.1.13 Program management
Function FIND BLOCK using block number
Precondition:
The configured input display must be prepared.
e.g. in the OGM in the program block
%BFM7 %1234
(OGM: APPROACH) N˜100 : @ccc (X:Y:Z) N15
: :
:
Data transfer into the program block
Example
STORE
Current values are transferred into the specified input fields. The data block is
selected via the block number field (BLOCK in the example).
STORE FIND
BLOCK DELETE
BLOCK
BLOCK 15
. . . . . . . . . . . . INPUT
DISPLAY
Operating sequence
(Configured input display)
(Edit basic display for the part program)
FIND
BLOCK
DELETE
BLOCK
With this key, you can delete the data block with the preselected number.
Back translation
3-70 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)