Siemens Sinumerik 810T User Manual

Page 105

Text mode
Original mode

09.91

3 Operating Sequences

3.1.4 Tool offset

L2 Basic

L1 Basic

Identifiers P = ”8” and P = ”9” are reserved
for special uses.
The ”Basic dimension” permits an additional
tool length offset.

The standard list of identifiers 0 to 9 can be raised to a

maximum of 16 via MD.

Operate the ”Tool offset” softkey.
(This is possible in all operating modes).

TOOL
OFFSET

Sequence of operation

This input screen form appears. The
current input field (=the field into
which your input will be transferred) is
displayed in inverse video (here in the
first line).

((Bild 810T/16 einmontieren))

3-7

SINUMERIK 810T, GA3 (BN)