Sequence of operation: calling machine data bits – Siemens Sinumerik 810T User Manual
Page 297
7 Interfacing to the Machine
01.93
7.3.3 Machine data bits
Sequence of operation: calling machine data bits
Sequence of operation as in the Section 7.3.1 for calling ”General machine data”, up to
operating the ”NC MACHINE DATA” softkey, and then ...
... operate the ”MACHINE DATA BITS” softkey.
The ”Machine data bits” display appears.
Using the keyboard, now enter the number of the
desired machine data and operate the search key.
The machine data searched for and the bit pattern stored in the control are displayed marked
in inverse video.
You can also use the cursor keys
or
the ”Page Up/Down” keys call further machine data.
MACHINE
BITS
...
...
• • •
or
Please consult the machine tool manufacturer's documentation for the
setting and significance of the individual machine data bits.
7-8
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)