1 setting data bits – Siemens Sinumerik 810T User Manual
Page 181
3 Operating Sequences
09.91
3.1.15 Data input/data output
3.1.15.1 Setting data bits
The setting data - from byte No. 5000 to 5029 - each consist of 8 bits: No. 0 to No. 7.
These setting data serve for the matching of Interfaces 1 and 2, for the connection of different
devices.
SETTING
DATA
Operate the ”SETTING DATA” softkey in any of the operating
modes.
SETTING
BITS
Using the softkey, select the ”SETTING BITS” function.
Using an input form on the CRT you can enter the desired bit pattern for any byte in the
range 5000 to 5029.
Using the ETC key, extend the displayed softkey menu.
7
6
5
4
3
2
1
0
5011
1 1 0 0 0 1 0 0
possible bit statuses:
”0”= Bit is not set
”1”= Bit is set
Bit pattern of the byte of
setting data 5011
Setting data no.
Explanation of setting data - structure:
(e.g. for setting data ( SD ) 5011)
Bit no.
Sequence of operation
3-78
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)