Siemens Sinumerik 810T User Manual
Siemens Equipment
Table of contents
Document Outline
- Preliminary Remarks
- Contents
- 1 General Notes
- 2 Operation
- 2.1 Operating elements
- 2.2 Switching on / off
- 2.3 Operating modes
- 2.4 Operating mode menu trees
- 2.5 Glossary of softkey functions
- 3 Operating Sequences
- 3.0 Preliminary remarks
- 3.1 Preparation
- 3.1.1 Switching on
- 3.1.2 Traverse to reference point
- 3.1.3 Tools
- 3.1.4 Tool offset
- 3.1.5 Zero offset
- 3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICATION”
- 3.1.7 Flexible plane selection
- 3.1.8 Axis synchronization
- 3.1.9 TRANSMIT coordinate transformation
- 3.1.10 Program input
- 3.1.11 Contour
- 3.1.12 Program correction (”EDIT”): Insert/modify/delete word, insert/delete block
- 3.1.13 Program management
- 3.1.13.1 Displaying the stored programs (”DIRECTORY”)
- 3.1.13.2 Protection of subroutines (cycle lock)
- 3.1.13.3 Cycle lock release (”ENABLE”)
- 3.1.13.4 Copying a program (”COPY”)
- 3.1.13.5 Moving a program (”MOVE”)
- 3.1.13.6 Renaming a program (”RENAME”)
- 3.1.13.7 Deleting a program (”DELETE”)
- 3.1.13.8 Reorganizing the program memory (”REORG”)
- 3.1.13.9 ”Selecting a program”
- 3.1.13.10 Operator guidance macros (OGM) and back translation
- 3.1.14 ”SIMULATION”
- 3.1.15 Data input/data output
- 3.1.16 NC in two languages
- 3.2 Machining
- 3.2.1 Starting a part program
- 3.2.2 ”AUTOMATIC” operating mode - selection of the ”CURRENT VALUES” or ”CURRENT BLOCK” display
- 3.2.3 Influencing ”AUTOMATIC” operation
- 3.2.4 ”Manual data input - automatic” (MDI AUTOMATIC) mode
- 3.2.5 ”TEACH IN”
- 3.2.6 ”PLAYBACK”
- 3.2.7 ”JOG” mode
- 3.2.8 ”Incremental” mode (”INC FEED 1 ... INC FEED 10 000”)
- 3.2.9 ”HANDWHEEL”
- 3.2.10 ”DRF”
- 3.2.11 ”Actual value setting” mode (”PRESET”)
- 3.2.12 ”Repositioning” mode (”REPOS”)
- 3.2.13 Scratching
- 4 Monitoring Functions
- 5 Maintenance
- 6 Data Interfaces
- 7 Interfacing to the Machine
- 8 Appendix