Siemens Sinumerik 810T User Manual

Page 148

11.90

3 Operating Sequences

3.1.10 Program input

This display appears on the CRT.
The control shows you the last part
program called, in the example
program no. ”%88”.

((Bild 810T/11 einmontieren))

BLOCK
NUMBER

GUIDING

SELECT
PROGRAM

EDIT

Using the ”SELECT PROGRAM” softkey call the desired
program.

Operate the ”EDIT” softkey.

Enter the desired program no. ”%12”.

Operate the ”GUIDING” softkey.

Operate the ”BLOCK NUMBER” softkey. The
block number ”N0005” is displayed.

Note:
The block numbers are generated by the control in steps
of 5, i.e. after each LF (end of block) the block number is
incremented by ”5”.

3-47

SINUMERIK 810T, GA3 (BN)