Siemens Sinumerik 810T User Manual

Page 219

3 Operating Sequences

11.90

3.2.4 ”Manual data input - automatic” (MDI AUTOMATIC) mode

3.2.4

”Manual data input - automatic” (MDI AUTOMATIC) mode

In this operating mode, you can process individual operations, block by block under NC
control. After the blocks entered have been processed, they are deleted.

Operate the operating mode selection key on the
integrated machine control panel, and then the
”MDI-AUTOMATIC” softkey or...

... set the operating mode selector switch on the
external machine control panel to this symbol.

MDI
AUTOM.

and

Sequence of operation

This screen form appears with the
input field marked in inverse video.

(( 810T))
(( Bild 5 von Druckerei

einmontieren

Using the numerical keyboard enter a block
following the guidelines in the Programming
Instructions, and terminate each input in-
cluding ”LF” (end of block) using the input
key.

...

3-114

SINUMERIK 810T, GA3 (BN)