Siemens Sinumerik 810T - Manual (Page 172)

01.93 3 Operating Sequences
3.1.13 Program management
Back translation
Move the cursor into the required data block in the basic display part program under EDIT and
press the softkey INPUT DISPLAY.
STORE
INPUT
DISPLAY
With "STORE", the changed values are transferred to the appropriate
data block in the part program. The basic display part program is
displayed again.
. . . . . . . . . . . . STORE
Start position : 123
Number of strokes : 24
End position : 567
Change data as required
The softkey function (29 or 79)
must be configured. Text
supplied by the machine
manufacturer.
. . . . . . . . . . . . INPUT
DISPLAY
(Edit basic display for part program)
Back translation
DIN instructions can be inserted between the data blocks generated by
OGMs. Insertions within a data block make back translation
of that data block impossible.
Example of the result of a part program
%1234 if BFM:
: %BFM 7
@ccc (X:Z:Y) N10 LF (OGM:grooving) N 100
R11=123 R12=24 . . . (OGM: grooving) LF R11= 101 R12= 112
or
%1234
if
%BFM 7
: (OGM:grooving) N 100
@ccc (X:Y:Z) N10 LF R11 = 101
R11 = 123 LF R12 = 112
R12 = 24 LF :
: :
(OGM: grooving) LF
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-69
SINUMERIK 810T, GA3 (BN)