3 tools, 4 tool offset, 1 input of tool offset – Siemens Sinumerik 810T User Manual

Page 102

Text mode
Original mode

3 Operating Sequences

09.91

3.1.3 Tools

3.1.3

Tools

The tooling should be carried out following the instructions of the

machine tool manufacturer!

3.1.4

Tool offset

3.1.4.1

Input of tool offset

The input display will help you to input ”Tool offset”.

You can call up this display with
the softkey in all

operating modes.

TOOL
OFFSET

This input screen form appears.

((Bild 810T/15 einmontieren))

Explanation of the input screen form

D 5

Name of the tool offset memory ( ”D5” in this example).
The SINUMERIK 810T has 99 offset memories.
You can therefore address the tool offset numbers
D1 ... D99, and store offset data under each one.

3-4

SINUMERIK 810T, GA3 (BN)