Siemens Sinumerik 810T - Manual (Page 176)

11.90 3 Operating Sequences
3.1.14 “SIMULATION”
Using the keyboard, enter the desired program number
”%...” (or ”L...”)- ”%16” in this example.
Operate the ”SELECT PROGRAM” softkey, and then
”SIMULATION”.
Now select ”AREA W-PIECE” in the newly displayed
softkey menu.
%
1
F
6
K
SELECT
PROGRAM SIMULA-
TION
AREA
W-PIECE
This input form with the input fields for
”Simulation area” appears.
The current input field, into which you
can input values, is identified in inverse
video.
(( 810T))
(( Bild 32 von Druckerei
einmontieren
Using the keyboard, now enter the appro-
priate values for the ”Simulation area” into
the input fields. Terminate each input with
the input key. After each input, the inverse
video marking jumps to the next input field.
... ...
... ...
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-73
SINUMERIK 810T, GA3 (BN)