Siemens Sinumerik 810T - Manual (Page 160)

3 Operating Sequences 11.90
3.1.13 Program management
3.1.13 Program management
3.1.13.1 Displaying the stored programs (”DIRECTORY”)
Operate the ”PART PROGRAM”, and ”DIRECTORY”
softkeys one after the other in any of the operating modes:
PRESET / JOG / AUTOMATIC /
INC 1 .... INC 10 000 / REFPOINT.
DIREC-
TORY PART
PROGRAM
and
Sequence of operation
The relevant directory is
displayed.
All main programs are listed.
((Bild 810T/30einmontieren))
SUB-
ROUT.
When the display is full :
By operating the ”Page up/down” keys, you obtain displays
of directories of further stored main programs.
CYCLES
The displays of the directories for:
”SUBROUTINE” or ”CYCLES” are
selected using the softkey menu on the CRT.
”Page up/down” is possible as described previously.
or
3-58 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)