Siemens Sinumerik 810T - Manual (Page 67)

09.91 2 Operation
2.4 Operating mode menu trees
2.4 Operating mode menu trees
In this section you will find graphical overviews for all the SINUMERIK 810 T operating modes.
For each operating mode all the appropriate branches to further functions are represented for:
• ”AUTOMATIC” mode
• ”JOG” mode
• ”JOG” mode (to ”TEACH IN/PLAYBACK” function in ”AUTOMATIC” mode)
• ”MDI-AUTOMATIC” mode
• ”REFPOINT” mode
• ”INC FEED 1 ... INC FEED 10000” mode
• ”PRESET” mode
• ”REPOS” mode
• ”GUIDING” (operator prompting) function.
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 2-47
SINUMERIK 810T, GA3 (BN)