Siemens Sinumerik 810T User Manual
Page 7
Technical comments
Occasionally in this documentation you will come
across this symbol and a reference to an Order
Code.
This is intended to indicate that the function described is only capable of operating if the
control includes the option shown. An overview of the possible Order Codes is provided in
Part 1: Operating / Section 7.2.
This symbol appears in the documentation whenever
the machine tool manufacturer can influence the
described operational response by modifying a
machine data (MD)!
Please refer to the machine tool manufacturer's
documentation.
Functions over and above those described in this documentation may be executable in the
control.
However, this does not represent an obligation to provide such functions when the system is
supplied or on servicing.
This User's Guide applies to:
SINUMERIK 810T Control, Basic Version 3
Software Version 3.