Siemens Sinumerik 810T - Manual (Page 129)

3 Operating Sequences 01.93
3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICAT.”
Operate the ”SETTING DATA” softkey in any
operating mode.
Operate the ”SPINDLE” softkey.
Extend the softkey menu displayed using the ETC
key to the right below the display.
SPINDLE
SETTING
DATA
Sequence of operation for ”SPINDLE”setting data
This input screen form appears with
the input field marked in inverse video.
((Bild 810T/23 einmontieren))
Enter the value for the selected input field with the
numeric keys.
Subsequently, you can transfer the value into the
input field with the input key.
With the cursor keys, position the cursor at the
desired input field.
... ...
• • •
3-28 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)