Siemens Sinumerik 810T - Manual (Page 59)

09.91 2 Operation
2.3.3 Selection of operating modes
Further selection: Operating mode INC FEED 1 . . . . INC FEED 10 000 ( Incremental jog)
Operate the key on the machine control panel.
You operate one of these softkeys.
The basic display for ”INC 1... INC 10 000” mode is shown on the CRT display.
INC
1 000
INC
10 000
INC
100
INC
10
INC
1
>
The menu
shows you the
function of each
softkey.
Operate the ETC key under the CRT display once.
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 2-39
SINUMERIK 810T, GA3 (BN)