Siemens Sinumerik 810T - Manual (Page 125)

09.91 3 Operating Sequences
3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICAT.”
Channel-specific and central R parameters:
Channel-specific R parameters (0-699)/ Central R parameters (700-999)
No.
Used in
cycle
Permanently
assigned?
Function
As long as cycles
are being
processed
Transfer parameters, see Descriptions:
Standard cycles, Measuring cycles, Mould
making cycles. R 0
:
R 49
R 50
:
R 99
R 110
:
R 199
R 200
:
R 219
R 220
:
R 239
R 300
:
R 499
In all
Siemens
cycles
In all
Siemens
cycles
As long as cycles
are being
processed
Local R parameters
Cycle calculations are carried out with
these R parameters
L 898
:
L 979 Yes Global R parameters
Measuring cycles -machine dat
a
In all
Siemens
cycles
As long as cycles
are being
processed
Converter (PG 675 or WS 800)
SINUMERIK 3/8:
800 converted cycles
All cycles
generated with
WS 800
WS 800 compiler
All cycles
generated with
WS 800
As long as cycles
are being
processed
WS 800 compiler
(STACK for the local
R parameters R 50-R 99)
R 240
:
R 299
As long as cycles
are being
processed
Reserved for SIEMENS
R 500
:
R 699 Free for user Additional
channel-
specific
parameters
810T/M
R 960
:
R 999
R 9n
:
R9n
+ 9
L 968
L 969 As long as cycles
are being
processed
R 800
:
R 959 Free for user
Reserved for SIEMENS
Transfer program n=00... 90 (Working
channel R 11-R 199 <--> Store channel)
10 R
parameters required: No. is freely
selectable.
R 700
:
R 799 Free for user Central
parameters
810T/M
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-25
SINUMERIK 810T, GA3 (BN)