Siemens Sinumerik 810T - Manual (Page 63)

11.90 2 Operation
2.3.5 Branching to operating functions within an operating mode
2.3.5 Branching to operating functions within an operating mode
Depending on the mode you have selected, you will be offered a ”Basic softkey menu” of
operating functions in the menu display (2.1.1.1) on the CRT.
After you select a function using the softkeys, the control will display other/new menus.
”Menu trees” with several branches will be generated.
Menu trees for each operating mode are stored in the control:
Branching of the operating functions (”Menu tree”) with stylized representation of the menus
Hatched areas in the
menus:
the appropriate softkey
has been operated.
Select any function dis-
played with the
appropriate softkey
etc.
>
etc.
You have called up any mode:
... or extend the menu display with this key to display
further functions (if present).
Note :
The detailed branching structure is explained separately for each operating mode in
Sections 2.4.1 to 2.4.9.
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 2-43
SINUMERIK 810T, GA3 (BN)