Siemens Sinumerik 810T User Manual

Page 215

3 Operating Sequences

11.90

3.2.3 Influencing ”AUTOMATIC” operation

If the deletion range is defined as

MP =

0-8999 or

100-799,

then

the main programs with the numbers 9000 and
the subroutines 99 or 800

are not deleted prior to retroloading. They remain in the memory throughout OPS!

2) The program list must have been completed.

3) All files which are to be processed according to the numbers in the program sequence list

must exist on the diskette inserted.

The display below appears on the screen. You can now start, monitor and
interrupt program sequencing.

RUN
OPS

Sequence of operation

You operate the “RUN OPS” softkey.

(( 810T))
(( Bild 50 von Druckerei

einmontieren

3-110

SINUMERIK 810T, GA3 (BN)