Siemens Sinumerik 810T - Manual (Page 93)

09.91 2 Operation
2.5 Glossary of softkey functions
OVERSTORE
You can change the value of the T, D, S, H, M words in the buffer memory.
PART PROGRAM
The ” PART PROGRAM” softkey leads to:
– EDIT
– TEACH IN / PLAYBACK
– CORRECT BLOCK
– DIRECTORY
– PROGRAM HANDLING
This key is not used to select a program for processing.
After ”DATA OUT”, you can select program output with the softkey ”PART PROGRAM”.
PLANE
Select the machining plane in simulation and contour definition.
PLAYBACK
With this function, the positions are transferred and a program is built up.
PLC ALARM
All current PLC alarms are displayed (see Section 4).
PLC MESSAGE
All current PLC messages are displayed (see Section 4).
PLC - MD
(PLC MACHINE DATA)
The PLC machine data are displayed. After ”DATA OUT” you select the output of PLC
machine data via ”PLC MD” softkey.
PLC STATUS
The PLC status shows the current state of all inputs, outputs, flags, timers, counters and data
words on the CRT :
– IW = Input word
– QW = Output word
– FW = Flag word
– T = Timer
– C = Counter
– DB = Data block
– DD PARALL. = Display of two data words
– DW = Data word
– KH = Hex constant
– KM = Binary constant
– KF = Fixed-point number constant
– KS = Symbol constant (up to two characters)
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 2-69
SINUMERIK 810T, GA3 (BN)