Siemens Sinumerik 810T - Manual (Page 156)

3 Operating Sequences 11.90
3.1.12 Program correction (”EDIT”): Insert/modify/delete word, insert/delete block
3.1.12 Program correction (”EDIT”):
Insert/modify/delete word, insert/delete block
You can edit any part program stored in the program memory.
Program correction can also be used while another part program is being processed.
The following corrections are possible:
• Input word
• Modify word
• Delete word
• Input block
• Delete block.
• • •
Operate the ”PART PROGRAM” and then
the ”EDIT” softkeys in any of the operating modes :
PRESET/JOG/AUTOMATIC/INC1 ... INC10 000/REFPOINT.
Call the desired program using
”PROGRAM SELECT”.
PROGRAM
SELECT
EDIT
Using the keyboard, enter the %...
(or ”L...”) number of the program
you wish to edit.
You can now either modify a stored part program or enter a new program in the displayed
screen form.
PART
PROGRAM
%
... ...
Sequence of operation
3-54 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)