Siemens Sinumerik 810T - Manual (Page 163)

11.90 3 Operating Sequences
3.1.13 Program management
3.1.13.4 Copying a program (”COPY”)
Using the ”COPY” function, you can store the same program under different program numbers
in the program memory.
This enables you to keep one program with the contents unchanged and make changes to the
copy.
Operate the ”PART PROGRAM” and
”PROGRAM HANDLING” softkeys one after the
other, in any of the operating modes:
PRESET / JOG / AUTOMATIC /
INC 1 .... INC 10000 / REFPOINT
PART
PROGRAM PROGRAM
HANDLING
Sequence of operation
The relevant CRT display is shown, -
program no.
”%88” in the example, that was the
last program to be called.
((Bild 810T/31 einmontieren))
Using the keyboard, enter:
” % 88 = % 5 ”.
Now operate the ”COPY”
softkey.
%
8
C
8
C
=
H %
5
J
COPY
The control now copies program ”%88” and stores a copy it under program number ”%5”.
Program ”%88” remains unchanged.
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-61
SINUMERIK 810T, GA3 (BN)