Siemens Sinumerik 810T - Manual (Page 168)

11.90 3 Operating Sequences
3.1.13 Program management
3.1.13.8 Reorganizing the program memory (”REORG”)
Using the ”REORG” function, the contents of the program memory can be reorganized.
The space that has been cleared by deleting the programs, can be used again for the input of
programs.
In any of the operating modes,
PRESET / JOG / AUTOMATIC / INC 1 .... INC 10 000 /
REFPOINT, operate the ”PART PROGRAM” and
”PROGRAM HANDLING” softkeys one after the
other.
Operate the ”REORG” softkey.
The program memory is reorganized by the control.
Switch back to the higher-level menu for softkey
functions, and subsequently operate the
”DIRECTORY” softkey.
The available memory space is displayed on the CRT.
Attention:
The available (displayed) memory cannot be used to its full capacity!
The following must be deducted from the displayed capacity:
•
10 % are reserved blank (blanks are provided for subsequent editing)
• plus: 11 characters multiplied by the number of possible programs (max. 200) in
program memory.
REORG
DIREC-
TORY
PART
PROGRAM PROG.-
HANDL.
Sequence of operation
The number of possible programs is fixed in a machine
data.
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-65
SINUMERIK 810T, GA3 (BN)