Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 90)

6–4 Working with Applications and Screens
Publication 2711-6.0
4. In the Terminal Name box, enter a 1 to 32 character name for the
terminal. This name identifies the terminal to the project.
If the selected project contains existing terminal devices, you can
select the name of a terminal from the Terminal Name box.
To copy, rename or delete devices from a project, see page 21–4.
5. Under Terminal Type Information, define the PanelView terminal
in which the application will run, by selecting:
– Terminal option from the PV Type box
– Keypad, Touch, or Keypad & Touch (PV550/PV600 only)
– Catalog number and firmware version installed in the terminal
from the Catalog and Version list. The list is filtered based on
the previous two selections.
The Ports area displays the physical ports and protocols of the
selected terminal.
If you selected an existing terminal from the Terminal Name box, the
dialog displays the defined terminal information.
6. Click the OK button.
The application file window opens showing the name of the
application and the selected terminal. Because the file does not
contain any screens the Screens box is empty.
Application Name
You are ready to create a new application screen. See page 6–10.
"
"