Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 476)

Internal Read Only Tags G–2
Publication 2711-6.0
PV900M/1000G Tags
Tag Name Data Type Value Range Description
@Read_DisplayOnTime Unsigned Integer 0 to 65535 Minutes the terminal display has been running
@Read_LCDIntensity Unsigned Integer 1 to 100 900M only: 1=35%, 9=40%, 24=50%,
39=60%, 54=70%, 70=80%, 85=90%,
100=100%
@Read_LCDRevVideo Unsigned Integer 0 or 1 0 = White displays on black background
1 = Black displays on white background
@Read_ScrnCond_Hour Unsigned Integer 0 to 23 Combined with @Read_ScrnCond_Min to de-
termine the time of day to start conditioner.
@Read_ScrnCond_Min Unsigned Integer 0 to 59 Combined with @Read_ScrnCond_Hour to
determine the time of day to start conditioner.
@Read_ScrnCond_Mode Unsigned Integer 0 to 1 0=Disabled, 1=Enabled
@Read_ScrnSave_Intensity Unsigned Integer 0 to 100 900M only: 0=0%, 1=35%, 9=40%, 24=50%,
39=60%, 54=70%, 70=80%, 85=90%,
100=100%
@Read_ScrnSave_Mode Unsigned Integer 0 to 2 0=Off, 1=On, 2=Timed
@Read_ScrnSave_Time Unsigned Integer 1 to 1800 Screen save timeout in seconds.
@Read_TermOnTime Unsigned Integer 0 to 65535 Minutes the terminal CPU has been running.
PV600C/900C/1000C Tags
Tag Name Data Type Value Range Description
@Read_DisplayOnTime Unsigned Integer 0 to 65535 Minutes the terminal display has been running
@Read_LCDIntensity Unsigned Integer 10 to 100 Percent of display intensity (900C range is
50–100%)
@Read_ScrnCond_Hour Unsigned Integer 0 to 23 Not used
@Read_ScrnCond_Min Unsigned Integer 0 to 59 Not used
@Read_ScrnCond_Mode Unsigned Integer 0 to 1 Not used
@Read_ScrnSave_Intensity Unsigned Integer 0 to 100 Percent of display intensity
@Read_ScrnSave_Mode Unsigned Integer 0 to 2 0=Off, 1=On, 2=Timed
@Read_ScrnSave_Time Unsigned Integer 1 to 1800 Screen save timeout in seconds.
@Read_TermOnTime Unsigned Integer 0 to 65535 Minutes the terminal CPU has been running.
PV1400 Tags
Tag Name Data Type Value Range Description
@Read_DisplayOnTime Unsigned Integer 0 to 65535 Minutes the terminal display has been running
@Read_LCDIntensity Unsigned Integer 25 to 100 Percent of display intensity
@Read_Degauss_Hour Unsigned Integer 0 to 23 Combined with @Read_Degauss_Min to de-
termine time of day to start conditioner.
@Read_Degauss_Min Unsigned Integer 0 to 59 Combined with @Read_Degauss_Hour to de-
termine the time of day to start conditioner.
@Read_Degauss_Mode Unsigned Integer 0 to 1 0=Disabled, 1=Enabled
@Read_ScrnSave_Intensity Unsigned Integer 0 to 100 Percent of display intensity
@Read_ScrnSave_Mode Unsigned Integer 0 to 2 0=Off, 1=On, 2=Timed
@Read_ScrnSave_Time Unsigned Integer 1 to 1800 Screen save timeout in seconds.
@Read_TermOnTime Unsigned Integer 0 to 65535 Minutes the terminal CPU has been running.