Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 297)

17–27 Formatting Objects and Text
Publication 2711-6.0
Underlining Text
You can toggle underlining on or off for screen text or inner text of
an object. For multistate or list objects, you can toggle underlining
on or off for each state.
The underline option applies to an entire text string not individual
letters or words in the string.
The entire
test string
is underlined
To underline text:
1. Select the object with text you want to underline.
2. Click the Inner Text tool on the tool bar.
Or choose Inner Text from the Format menu.
3. If the object is multistate, select a state.
•
From the tool bar, select a state from the State box.
•
Or choose Next State or Previous State from the Format menu.
4. Click the Underline tool on the Format bar.
Or choose Underline from the Format menu.
The entire text string is underlined.
5. To resize, align, set colors or activate blinking for the text, click
the appropriate tools on the Format bar.
6. To exit inner text mode, choose the Inner Text command or tool.
Underlining remains active until you turn it off.
For multistate and list objects, you can underline text for a specific
state from the State tab of the object’s dialog.
"