Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 415)

23–27 Validating and Transferring Applications
Publication 2711-6.0
Uploading from a PanelView Terminal
This section shows how to upload an application from a PanelView
terminal. The application is stored as a DOS file with a .PVA
extension.
To upload an application:
Select appropriate driver
Select terminal from which to
upload application.
➁ Select Upload parameters.
➀ Click the Upload tool or choose Upload from the File menu.
Enter name of .PVA file in which to
save the uploaded application or
click Browse to search for a file.
➂ After clicking OK, the following dialog opens.
➃ The application is saved to .PVA file and you return to the utility workspace.
Click OK to start upload.
Depending on the
Source selected, you
may have to click Setup
to edit/verify terminal
parameters.
Select the type of terminal from
which you are uploading application.
➄ Open .PVA application from PanelBuilder File menu.
The .PVA file is automatically translated to a
.PBA file for use in PanelBuilder.
Under Presets, select values to upload:
S Original to upload presets (initial values)
defined for inputs.
S Current States to upload current input
values in terminal.