Lenze EVS9332xK - Manual (Page 67)

Function library
Function blocks
3.2.6 Addition block (ADDPHD1)
3−39
l
EDSVS9332K−EXT EN 4.0
3.2.6 Addition block (ADDPHD1)
Purpose
Superimposition of several curve profiles.
C1362/1
C1363/1
ADDPHD1-DFIN1 ADDPHD1-DFOUT
ADDPHD1-LIM
ADDPHD1
ADDPHD1-DFIN2
±29 999 rpm
ADDPHD1-DFIN3
C1362/2
C1362/3
C1363/2
C1363/3
+ +
+ –
Fig. 3−17 Addition block (ADDPHD1)
Signal Source Note
Name Type DIS DIS format CFG List Lenze
ADDPHD1−DFIN1 phd C1363/1 [rpm] C1362/1 1 1000 Addition input
ADDPHD1−DFIN2 phd C1363/2 [rpm] C1362/2 1 1000 Addition input
ADDPHD1−DFIN3 phd C1363/3 [rpm] C1362/3 1 1000 Subtraction input
ADDPHD1−DFOUT phd − − − − − Signal is limited to ±29999 rpm
No position loss when signal is limited
ADDPHD1−LIM phd − − − − − HIGH = signal at ADDPHD1−DFOUT is
limited
(Function is available from software
version 3.4 onwards)
Function
l The signals of the cam profiles at the inputs ADDPHD1−DFIN1 and ADDPHD1−DFIN2 are
added.
l The cam profile at the input ADDPHD1−DFIN3 is subtracted from the sum of ADDPHD1−DFIN1
and ADDPHD1−DFIN2.
l The result is output as speed in [rpm] at ADDPHD1−OUT.
)
Note!
l The integrated overflow buffer prevents the increments from getting lost when the
signal at ADDPHD1−OUT exceeds the limit of ±29999 rpm.
l The overflow buffer behaves according to the cycle of numbers (32 bits).