Lenze EVS9332xK - Manual (Page 27)

Configuration
Operating modes
2.3.1 Parameter setting
2−13
l
EDSVS9332K−EXT EN 4.0
2.3 Operating modes
By selecting the operating mode you can also select the interface you want to use for parameter
setting or control of the controller.
C0005 contains predefined configurations which allow a very easy change of the operating mode.
2.3.1 Parameter setting
Parameters can be set with one of the following modules:
l Communication module
– 2102 (LECOM A/B/LI)
– 2111, 2113 (INTERBUS)
– 2131, 2133 (PROFIBUS)
– 2175 (CANopen/DeviceNet)
l PC system bus module (CAN)
– 2173
2.3.2 Control
The drive controller can be controlled via terminals (X5 and X6), via the fieldbus module at X1 or via
the system bus (X4). Mixed forms are also possible.