Lenze EVS9332xK - Manual (Page 116)

Function library
Function blocks
3.2.22 Virtual clutch (CLUTCH1)
3−88
l
EDSVS9332K−EXT EN 4.0
Latch at setpoint position
l C1410 = 3
The drive remains in standstill until CLUTCH − PHI−ACT = CLUTCH − PHI−SET.
After a LOW HIGH edge at input CLUTCH1−CLOSE
– the output CLUTCH1−NSET outputs the speed setpoint 0
– CLUTCH1−PHI−ACT = CLUTCH1−PHI−SET sets the output CLUTCH1−OPEN=LOW,
– the hysteresis is adjustable under C1413/1.