Canon imageCLASS MF7470 - Manual (Page 46)

1
2
3
4
5
6
7
8
9
10
11
1-18
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Timer Settings
Setting the Sleep Mode
If the machine is idle for a certain period of time (after the last print
job or key operation is performed), the control panel power switch
automatically switches off to save power. The machine has entered
the Sleep mode.
1. Press (Additional Functions).
2. Press [Timer Settings].
3. Press [Auto Sleep Time].
4. Press [On].
5.
Press [-] or [+] to specify the desired Auto Sleep
Time, then press [OK].
The Auto Sleep Time can be set from 3 to 30 minutes.
You can also enter values using
– (numeric keys).
■ 6. Press [Done] repeatedly until the Basic Features
screen appears.
To resume the normal mode from the Sleep mode, press the
control panel power switch.
To enter the Sleep mode manually, press the control panel power
switch.
The machine can continue to receive fax/I-fax documents, and
process or print data sent from computers even if the machine is
in the Sleep mode.
Setting Auto Clear Time
If the machine is idle for a certain period of time (after the last print
job or key operation is performed), the display returns to the Basic
Features screen (standard settings) of the selected function. This
period of time is called the “Auto Clear Time.”
1. Press (Additional Functions).
2. Press [Timer Settings].
3.
Press [Auto Clear Time].
–
–
–
■