Canon imageCLASS MF7470 - Manual (Page 404)

1
2
3
4
5
6
7
8
9
10
11
11-21
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
Printer Settings
7. AUTO ERROR SKIP Sets whether to clear an error and continue printing automatically when an error occurs (Error
skip).
Error skip only temporarily clears an error, so the data may not print correctly.
This setting is valid even if multiple errors have occurred. –
–
OFF The auto continue is off. You must perform error skips from the touch panel display.
ON Error skips are performed automatically.
8. ERROR TIME OUT Sets the length of time before the machine returns an error when no data is received from the
computer.
If this function is set so that a job will timeout, the machine may end a print job before all the data has
been received if it takes a long time for the PC to send the data. If this occurs, adjust the length of the Error
Time Out setting.
ON Sets the error time out period. (5SEC–300SEC)
OFF The error time out is off.
9. COLLATE Sets whether to collate the printouts automatically.
OFF
COLLATE –
–
10. INIT. PRINTER SET Restores all to the default.
Off
On
Do not turn off the machine while the settings are being initialized as this may damage the machine's
memory.
–
–