Canon imageCLASS MF7470 - Manual (Page 183)

1
2
3
4
5
6
7
8
9
10
11
4-72
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Paper Drawer Selection
You can set how the machine prints documents when there is no
paper matching the size of the received document.
There are four printing methods (Switches A, B, C, and D):
• Switch A:
The image is printed over two sheets of paper that have the same
combined size as the received document.
• Switch B:
The image is printed with blank space on paper that has the same
width as the received document.
• Switch C:
The image is reduced and printed on paper that differs in width
from the received document.
• Switch D:
The image is printed on paper that is larger in size than the received
document.
1. Press (Additional Functions).
2. Press [Communications Settings] → [RX
Settings] under → [Select
Cassette].
The Select Cassette screen appears.
3. Select [On] or [Off] for the respective switches,
then press [OK].