Canon imageCLASS MF7470 - Manual (Page 355)

1
2
3
4
5
6
7
8
9
10
11
10-25
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
#0755 (for the imageCLASS MF7480 only)
Description You cannot send jobs because TCP/IP is not
functioning correctly.
Action Check TCP/IP Settings in Network Settings in
System Settings (from the Additional Functions
screen).
Description The IP address is not set.
Action Check TCP/IP Settings in Network Settings in
System Settings (from the Additional Functions
screen).
Description When the machine was turned on, an IP address
was not assigned to the machine by the DHCP,
RARP, or BOOTP server.
Action Check TCP/IP Settings in Network Settings in
System Settings (from the Additional Functions
screen). Or wait a while, and then try sending
again.
#0801 (for the imageCLASS MF7480 only)
Description A timeout error occurred while the machine was
communicating with the SMTP server to send an
e-mail message.
Action Check that the SMTP server is functioning
normally, or check the network status.
Description The SMTP server returned an error while trying to
connect. The destination is not correct. An error
occurred on the server side during transmission
to a file server.
Action Check that the SMTP server is functioning
normally. Check the network status. Check the
destination setting. Check the status and setting
of the file server.
#0802 (for the imageCLASS MF7480 only)
Description The name of the SMTP server or POP server in E-
mail/I-Fax in Network Settings in System Settings
(from the Additional Functions screen) is
incorrect.
Action Check the name of the SMTP server or POP server
in E-mail/I-Fax in Network Settings in System
Settings (from the Additional Functions screen).
Description The DNS (Domain Name System) server name is
not correct.
Action Check the settings in DNS (Domain Name
System) Server in IPv4 Settings or IPv6 Settings in
TCP/IP Settings in Network Settings in System
Settings (from the Additional Functions screen).
Description Connection to the DNS server failed.
Action Check that the DNS server is functioning
normally.
#0804 (for the imageCLASS MF7480 only)
Description You have no permission to access the folder.
Action Change the setting on the server to enable
access to the folder.
#0806 (for the imageCLASS MF7480 only)
Description An incorrect user name or password was
specified for the sending of a file to a file server.
Action Change the user name or password.
Description An incorrect destination was specified for the
sending of an e-mail message or I-fax.
Action Check the e-mail or I-fax address.