Canon imageCLASS MF7470 User Manual
Page 167
1
2
3
4
5
6
7
8
9
10
11
4-56
Previous
Back
Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Registering/Editing File Server Addresses
1.
Press (Additional Functions).
2.
Press [Address Book Settings] → [One-touch
Buttons].
If a password has been set for the Address Book, enter the password
using
–
(numeric keys), then press [OK] to enter the Address
Book Settings menu. (See “Setting a Password for the Address Book,”
on p. 8-16.)
The Register One-touch Button screen appears.
3.
Select a one-touch button to store or change,
then press [Register/Edit].
If the desired one-touch button is not displayed, press [
▼] or [▲]
to scroll to the desired one-touch button.
You can also specify the one-touch button’s number by entering
the three digit number of the desired one-touch button using
–
(numeric keys).
One-touch buttons that already have destinations stored in them
are displayed with a black square (
■) in the lower right corner of
the key.
If you select a one-touch button that already has destinations
stored in it, the destinations are displayed.
If you register multiple destinations as a group address in a one-
touch button, the number of destinations registered in the group
address is displayed.
4.
Press
[File].
If you select a one-touch button already storing a destination, skip
this step.
–
–
–
–
–
5.
Press the Protocol drop-down list, then select
the desired protocol.
[FTP]: Select this protocol if you are sending documents to a
computer running Sun Solaris 2.6 or later, Mac OS X, Internet
Information Services 5.0 under Windows 2000 Server, Internet
Information Services 5.1 under Windows XP Professional, Internet
Information Services 6.0 under Windows 2003 Server, Internet
Information Services 7.0 under Windows Vista, or Red Hat Linux 7.2.
[Windows (SMB)]: Select this protocol if you are sending documents
to a computer running UNIX/Linux (Samba 2.2.8a or later) or
Windows 98/Me/2000/XP/Server 2003/Vista.
6.
Set [Host Name], [File Path], [User], and
[Password].
For instructions on specifying each of the settings for FTP and
Windows (SMB), see “Specifying a File Server (imageCLASS MF7480
Only) ,” on p. 4-24.
7.
Press
[Next].
8.
Enter a name for file server address (up to 16
characters), then press [OK].
The first character that you enter for the name is used for sorting the
address list when you press keys, such as [ABC] and [DEF], on the
Address Book screen.