Canon imageCLASS MF7470 - Manual (Page 100)

1
2
3
4
5
6
7
8
9
10
11
3-29
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
6. Press [Done].
If you are placing originals with the same width, press [Same Width].
If you are placing originals with different widths, press [Different
Width].
7. Press (Start).
If the original is placed on the platen glass, follow the instructions
that appear on the touch panel display. Press (Start) once for each
original. When scanning is complete, press [Done].
To cancel this setting, press [Special Features] → [Different Size
Originals] → [Cancel].
To cancel all settings and return the machine to the Standard
mode, press (Reset). –
–
Sharpness
This mode enables you to make copies of originals with a sharper or
softer contrast. To reproduce text or lines with a sharper contrast,
use [High] as the setting. To copy originals containing printed
images or other halftones with a softer contrast, use [Low] as the
setting.
Low
If you make copies of an original containing halftones, such as a
printed photograph, using the Photo mode, the moire effect (a
shimmering, wavy pattern) may occur. In this case, you can lessen
this moire effect by using [Low] as the setting to produce a clearer
copy.
The world's coral reefs, where
brilliantly colored fish and a
myriad of other tropical creatures
come together. The world's coral reefs, where
brilliantly colored fish and a
myriad of other tropical creatures
come together. The world's coral reefs, where
brilliantly colored fish and a
myriad of other tropical creatures
come together.
Original Copy
Low Set Low Not Set
■
●