Canon imageCLASS MF7470 - Manual (Page 406)

1
2
3
4
5
6
7
8
9
10
11
11-23
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
Printer Settings
3. Y DIMENSION Specifies the vertical size of the custom paper.
(3.75"-11.69" (95 mm-297 mm))
9. APPEND CR TO LF Sets whether to append a carriage return (CR) when line feed code (LF) is received.
NO The print head moves down to the next line when line feed code is received, and the margin
does not change (such as the beginning of the next line).
YES The print head moves to the beginning of the next line when line feed code is received.
10. ENLARGE A4 Sets whether to expand the printable area of A4 size paper to that of Letter size in width.
This setting is applicable for the PCL5 printing only. The PCL6 printing is not supported.
This setting is applicable for A4 paper only.
This setting is applicable for portrait orientation only. –
–
–
OFF All the area on a page 1/8" (4.23 mm) from the top, bottom, left, and right edges is available for
printing on A4 paper.
ON All the area on a page 1/8" (4.23 mm) from the top and bottom edges and 1/8" (3.30 mm) from
the left and right edges is available for printing on A4 paper. Only the width increases.
11. HALFTONES Specifies the display pattern of subtle gradation (medium gradation) for black-and-white data
for each text part, graphics part and image part.
1. TEXT Enables this function to text parts.
RESOLUTION Prints precisely so that the lines of text data appear clearly. This setting is appropriate for
printing data that contains text or thin lines.
TONE Prints with a stable texture and distinct gradation, by enhancing the contrast of tone. This
setting is appropriate for printing image data such as photographic images.
GRADATION Prints with a smooth gradation and fine outline quality combined. This setting is appropriate for
printing diagrams or graphs in which gradation is used.