Canon imageCLASS MF7470 - Manual (Page 357)

1
2
3
4
5
6
7
8
9
10
11
10-27
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
#0821 (for the imageCLASS MF7480 only)
Description You have received data that cannot be processed
(TIFF analysis error).
Action Check the settings, and then ask the sender to
resend the data.
#0827 (for the imageCLASS MF7480 only)
Description You have received data that cannot be processed
(contains MIME information that is not
supported).
Action Check the settings, and then ask the sender to
resend the data.
#0828 (for the imageCLASS MF7480 only)
Description You have received HTML data.
Action Ask the sender to use a file format other than
HTML, and then resend the data.
#0829 (for the imageCLASS MF7480 only)
Description Data containing more pages than the machine
can hold in memory is received.
Action Print the received documents, and ask the sender
to resend the remaining pages.
#0839 (for the imageCLASS MF7480 only)
Description The user name or password for the SMTP
Authentication (SMTP AUTH) in Authentication/
Encryption in E-mail/I-Fax in Network Settings in
System Settings (from the Additional Functions
screen) is incorrect.
Action Check the user name and password for SMTP
Authentication (SMTP AUTH) in Authentication/
Encryption in E-mail/I-Fax in Network Settings in
System Settings (from the Additional Functions
screen). (See “E-Mail/I-Fax Settings,” on p. 6-12.)
#0852
Description An error occurred because the main power
switch was turned off while a job was being
processed.
Action Check to see if the main power switch is turned
on. Try processing the job again, if necessary.
#0995 (for the imageCLASS MF7480 only)
Description Communication reservation is cleared.
Action If necessary, try again from the beginning.