Canon imageCLASS MF7470 - Manual (Page 315)

1
2
3
4
5
6
7
8
9
10
11
9-10
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Replacing the Stamp Cartridge
Originals can be stamped to indicate that they have been sent.
Replace the stamp cartridge when this mark is faint or no
longer visible.
When replacing the stamp cartridge, take care not to allow ink to come in
contact with your hands or clothing. If ink gets onto your hands or clothing,
wash it off immediately with cold water.
1. Open the feeder cover, then open the inner
cover (B) by holding its front tab for removing
the old stamp cartridge (A).
2. Remove the old stamp cartridge using the
tweezers.
Widen the tweezers if necessary.