Canon imageCLASS MF7470 - Manual (Page 300)

1
2
3
4
5
6
7
8
9
10
11
8-18
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Restricting Job Recall
You can specify whether or not to allow using [Recall].
1. Press (Additional Functions).
2. Press [System Settings] → [ ▼] → [Restrict the
Send Function] → [Restrict Recall].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
– (numeric
keys), then press (Log In/Out) to enter the System Settings menu.
The Restrict Recall screen appears.
3. Select [On] or [Off], then press [OK].
[On]: Sending documents using the Recall function is not allowed.
[Off ]: Sending documents using the Recall function is allowed.
4. Press [Done] repeatedly until the Send Basic
Features screen appears.
Setting to Confirm Entered Fax Numbers
You can specify whether or not to confirm the entered fax numbers
each time you send a fax.
1. Press (Additional Functions).
2. Press [System Settings] → [ ▼] → [Restrict the
Send Function] → [Confirm Entered Fax
Numbers].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
– (numeric
keys), then press (Log In/Out) to enter the System Settings menu.
The Confirm Entered Fax Numbers screen appears.
■
■
3. Select [On] or [Off], then press [OK].
4.
Press [Done] repeatedly until the Send Basic
Features screen appears.
Restricting Sequential Broadcast
You can specify whether or not to allow sending the documents to
multiple recipients.
1. Press (Additional Functions).
2.
Press [System Settings] → [ ▼] → [Restrict the
Send Function] → [Restrict Sequential
Broadcast].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
– (numeric
keys), then press (Log In/Out) to enter the System Settings menu.
The Restrict Sequential Broadcast screen appears.
3. Select [Confirmation Broadcast], [Prohibit
Broadcast], or [Off], then press [OK].
[Confirmation Broadcast]: A confirmation message appears if you try
to send documents with sequential broadcasting.
[Prohibit Broadcast]: You cannot send documents with sequential
broadcasting.
[Off ]: Sending documents with sequential broadcasting is not
restricted.
4. Press [Done] repeatedly until the Send Basic
Features screen appears.
■