Canon imageCLASS MF7470 - Manual (Page 32)

1
2
3
4
5
6
7
8
9
10
11
1-4
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Feeder ■ A Feeder Cover
Open this cover to remove jammed originals.
B Slide Guides
Adjust the slide guides to match the width of the original.
C Original Supply Tray
Originals placed here are automatically fed sheet by sheet to
the scanning area of the platen glass. Place originals into this
tray with the surface that you want to scan face up.
D Original Output Area
Originals that have been scanned from the original supply
tray are output to the original output area in the order that
they are fed into the feeder.
Do not insert your fingers into the gaps around the original supply tray,
as your fingers may get caught. Also, be careful not to drop objects, such
as paper clips into the gaps, as doing so may cause damage to the
machine or cause it to break down.
When using the platen glass to copy or scan thick originals, such as
books or magazines, do not press down hard on the feeder.
If the original output area is blocked, originals may get damaged, and
printing may not be performed correctly. Therefore, do not place any
objects in the original output area. –
–
–