Canon imageCLASS MF7470 - Manual (Page 317)

1
2
3
4
5
6
7
8
9
10
11
9-12
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Replacing the Cartridge
When the machine runs out of toner, the following screen
appears on the touch panel display.
When this happens, remove the cartridge from the machine
and slowly shake it sideways to redistribute toner.
Reinstall the cartridge in the machine and print out a test page.
If the error message still appears, follow the instructions shown
on the screen and replace the cartridge.
If you press [Recover Later], you can continue operations, such
as setting modes and scanning originals, without replacing the
cartridge immediately.
Do not burn or throw used cartridges into open flames, as this may cause
the toner remaining inside the cartridges to ignite, resulting in burns or a
fire.
Do not store cartridges in places exposed to open flames, as this may
cause the toner to ignite, resulting in burns or a fire.
When discarding used cartridges, put the cartridges in a bag to prevent
the toner remaining inside the cartridges from scattering, and dispose of
them in a location away from open flames. –
–
–
Do not touch the rollers and parts which have labels “CAUTION! Hot
surface avoid contact” on. They become very hot during use.
Keep toner out of the reach of small children. If toner is ingested, consult
a physician immediately.
Take care not to allow toner to come into contact with your hands or
clothing. If toner gets onto your hands or clothing, wash it off
immediately with cold water. Washing it off with warm water will set the
toner, and make it impossible to remove the toner stains.
When you are replacing a cartridge, be sure to use a cartridge designed
for this product.
Do not replace cartridge until the message prompting you to do so
appears.
Do not attempt to replace the cartridge while the machine is printing.
Complete instructions on how to replace the cartridge can be accessed
by pressing [Previous] or [Next] on the touch panel display.
If the toner runs out during a print job, the machine will start printing the
remaining pages automatically after you replace the cartridge.
–
–
–
–
–
–
–
–