Canon imageCLASS MF7470 User Manual
Page 161
1
2
3
4
5
6
7
8
9
10
11
4-50
Previous
Back
Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
8.
Enter a name for the group address (up to 16
characters), then press [OK].
The first character that you enter for the name is used for sorting the
address list when you press keys, such as [ABC] and [DEF], on the
Address Book screen.
9.
Press [Done] repeatedly until the Send Basic
Features screen appears.
Editing Address Details
You can change destination details as necessary.
1.
Press (Additional Functions).
2.
Press [Address Book Settings] → [Register
Address].
If a password has been set for the Address Book, enter the password
using
–
(numeric keys), then press [OK] to enter the Address
Book Settings menu. (See “Setting a Password for the Address Book,”
on p. 8-16.)
The Register Address screen appears.
3.
Select the destination to be changed, then press
[Edit].
The current settings for the selected destination appear.
You cannot edit multiple destinations at the same time.
Press the alphanumeric keys (e.g., [ABC]) to display the individual
keys for each letter or number. You can select a letter or number
to restrict the displayed range of entries. Press [All] to return to
the full address list.
If the desired destination is not displayed, press [
▼] or [▲] to
scroll to the desired destination.
You can restrict the type of destinations displayed in the results
list by pressing the Type drop-down list.
You can select a destination and press [Details] to confirm the
detailed information related to the selected destinations. Press
[Done] to return to the previous screen.
If you select [All] in the Address Book drop-down list, the
destinations stored in the one-touch buttons are displayed.
However, you cannot edit these destinations. For instructions
on editing one-touch buttons, see “Storing/Editing One-Touch
Buttons,” on p. 4-51.
4.
Edit the address details, then press [Next].
You can only change the name of a destination registered as a group
address.
–
–
–
–
–
–